Tuesday, August 17, 2010

How to make a full-size ping pong Build under $ 70

The foundations for the construction of $ 70 table tennis

Table tennis, better known as ping pong requires two people, two rackets and a table. The problem is that the tables can cost up to $ 3,000!

Why not build your own?

First you need to make your measurements right if you want a professional, big table should be 9ft x 5ft, and at least 30 cm above the ground. The network must beplace in the central reservation of the table and measure 6 inches high. The specification of materials is a bit 'less severe, the area of each floor can be done, even if you have the test you are with the customs area, such as ping-pong balls bouncing around 4 inches when you drop by height of about sixth

The basics are that you will need about $ 50-70 for materials to build your own table, and a cut in pieces of about five meters wide, and makesmeet in the middle, you will use a mixture of glue and staples to set the table correctly. To start this project, you need to make a base for the table from scratch. Two by two wood will work fine. Measure and cut two pieces that are nine feet long and two pieces that are five feet wide. Place the timber in a rectangle, and then secure the corners together with wood screws. The easiest way to build plywood table, and then, with legs the same length,Piece together with the table legs with wood screws, and as additional precautionary measure, add a little 'glue.

No comments:

Post a Comment